N-Com basic kit 2, Инструкции пользователя и правила безопасности

Страница: 23 / 32

23
4. REMOVING THE BASIC KIT2
Fig. 40
To remove the basic Kit2 from the helmet,
remove the earphone and the comfort cheek
pads as shown in the assembly operations. Then
remove the polystyrene cheek pads. Remove the
protection plate (or the e-box in case of
Intercom Kit or Bluetooth Kit), then, looking at
the helmet from the outside, release the 15-way
connector by acting on the fastening clasp as
illustrated in the figure.

After releasing the 15-way connector from the shell, also remove the right part by
releasing the Basic Kit2 from the shell pins.
 Now remove the entire basic Kit2 from the helmet.
5. USING THE BASIC KIT2 WITH A CELL PHONE
The N-Com systems are preset for connection to a cell phone. By separately
purchasing an N-Com connection cable, specific for your cell phone model, you can use
the N-Com system as a simple earphone.
Cell phones are equipped with their own volume adjustment. Adjust the cell phone
volume levels so as to obtain the desired volume prior to using the system while
riding.
1. Connect the Mobile wire to the INPUT connector (3.5 mm jack).
2. Connect the Mobile wire to the cell phone.
3. Make sure that the cell phone displays the icon that signals connection to an
earphone