background image

 

 

31 

19.3.

 

Validity of this limited warranty 

This  warranty  is  valid  only  if  the  enclosed  warranty  form  is  duly  and  completely  filled  out  with  the  following 
information: 
Product identification code 
Name and stamp of the authorized dealer. 
Product purchase date. 
Buyer’s name and address. 
Nolangroup  reserves  itself  the  right  to  not  carry  out  repairs  under  warranty  if  the  aforementioned  information  is 
removed or modified after the original purchase of the product from the dealer. 
 

19.4.

 

Procedure for the forwarding of claims 

To  forward  a  claim  covered  by  this  warranty,  the  buyer  has  to  directly  notify  the  dealer  where  the  helmet  was 
purchased with regards to the defect, presenting at the same time the defective product, a copy of the sales receipt 
and the Warranty registration form, duly filled out as instructed above. 
PRIOR  TO  CONTACTING  THE  DEALER,  WE  RECOMMEND  THAT  YOU  READ  CAREFULLY  THE  USER  MANUAL 
ENCLOSED WITH THE PRODUCT. 
AFTER 2 (TWO) YEARS FROM THE DATE OF PURCHASE, THIS LIMITED  WARRANTY IS VOID  FOR ALL EFFECTS AND 
PURPOSES. 
Repairs  or  maintenance  under  warranty  do  not  extend  the  period  of  the  warranty  itself.  Therefore,  in  case  the 
product or one of its components is replaced, this does not initiate a new warranty period, as the purchase date of 
the original product shall be taken into account for warranty purposes. 
Only  for  repairs  or  replacement  of  electronic  components,  in  the  event  that  Nolangroup  proceeds  to  repairing  or 
replacing  the  product,  said  product  shall  enjoy  a  warranty  period  equal  to  the  residual  portion  of  the  original 
warranty or ninety (90) days from the repair date (the longer period being considered). 
The repair or replacement can be carried out even with regenerated components with equivalent functions. 
The replaced parts or components shall become property of Nolangroup. 
THIS  WARRANTY  VOIDS  AND  REPLACES  ANY  OTHER  WRITTEN  OR  VERBAL  WARRANTIES  PROVIDED  FOR  BY  THE 
LAW THAT CAN BE DEROGATED AT THE PARTIES’ WILL; SPECIFICALLY, NOLANGROUP

 

DOES NOT GRANT SPECIFIC 

WARRANTS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL NOLANGROUP 
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO LOST  PROFITS OR 
COMMERCIAL DAMAGES, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY THE LAW. 
NOLANGROUP  RESERVES  ITSELF  THE  RIGHT  TO  MODIFY,  AT  ANY  TIME  AND  WITHOUT  ADVANCE  NOTICE,  THE 
PRODUCT CHARACTERISTICS, FUNCTIONS, COMPATIBILITY AND SOFTWARE. 
Some Countries do not allow the exclusion or limitation of incidental or consequential damages, or the limitation of 
the duration of implied warranties; as a result of this, the previous limitations and exclusions may not be applicable 
to you. 
This warranty does not have any effect on the  customer’s legal rights  under the national jurisdiction in force or on 
the consumer’s rights towards the dealer sanctioned by the purchase/sale contract. 
This  warranty  is  valid  throughout  the  European  territory,  and  it  represents  the  only  express  warranty  provided  by 
Nolangroup in relation to the sale of its own products. This warranty does not affect the rights to which the buyer is 
entitled and which are expressly provided for by Directive 1999/44/CE. 
This  warranty  does  not  affect  the  consumer’s  rights  provided  for  by  the  law,  and  specifically  by  the  provisions  of 
Legislative Decree 2 February 2002 n. 24. 
 

19.5.

 

Product identification 

N-Com  products  are  identified  by  means  of  a  code  that  allows  product  traceability  and 
identification. 
 
The identification code is listed on the adhesive label applied to the B901L system and on 
the outside of the sales package. 

 

Содержание B901L

































Отзывы: