EN
8
3.2.
Installing the B901L system on the helmet
Fig. 6
Place the system in the special housing in the
back of the helmet, pushing it all the way
into the groove (Fig. 6).
Important
: Make sure the Flex cable of ESS
system is not pulled too tightly.
Fold the antenna back inside the shell.
Fig. 7
N.B.: For positioning of the wiring and of the
microphone in the N100-5 helmet, follow the
instructions provided in the dedicated box.
Fix the cable inside the helmet and make
sure the right fixing clip snaps into its
housing (Fig. 7)
Fig. 8
Position the microphone in the housing on
the left of the helmet, inserting the metal
boom in the groove found in the chin guard
coupling frame (Fig. 8).
Caution
: make sure that the side of the
microphone support with the writing “N-
Com” is facing inward.
Fig. 9
Fix the cable inside the helmet and make
sure the left fixing clip snaps into its housing.
Hook up the keypad to the helmet by
clicking in the relevant hooks.
N.B.: For positioning of the keypad in helmets
N87 and N100-5, follow the instructions provided
in the dedicated box.
Open the rubber cap of the B901L system.
Reassemble the gasket and secure it with the
specific screw.
