EN
12
Position the left and right speakers in the respective housing obtained in the polystyrene cheek
padding. If necessary, rotate the speakers slightly in their housing.
Reassemble the cheek padding.
3.3.
Positioning the ESS system on the helmet
Fig. 24
Remove the protective film from the
double-sided adhesive tape of the helmet
adapter (Fig. 24) and apply the ESS system
to the shell (Fig. 25).
Attention
: Position the “
n
” of the ESS
system at the shell edge gasket screw, so
that the adapter is lined up with the
helmet lines.
Fig. 25
Remove the clear protective film from the
ESS system.
Reassemble the cheek padding.
3.4.
Removing the B901L system from the helmet
Fig. 26
Proceed as follows to remove the
B901L
system
from the helmet:
Remove the ESS light from the shell (Fig.
26).
