N-Com B3, Инструкции пользователя и правила безопасности

Страница: 9 / 28

B3
9
3.1. Installing the microphone
JET HELMETS OR FLIP-UP HELMETS
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Prepare the microphone by inserting the microphone
clamp, being careful to position it properly (Fig. 9)
Note : the flat part of the clamp must be facing upward
when the microphone is positioned as shown in figure 11.
 Position the microphone in its support as shown in
figure 10, being careful that the fluorescent clamp is
facing toward the inside of the helmet.

Insert screw in the microphone clamp; use the key to
screw in the microphone securing screw to the shell
frame.
FULL-FACE HELMETS

Take the polystyrene cheek pad (left-hand side) and position the microphone in its housing, as
shown in fig. 13, making sure that the fluorescent band stays facing the inside of the helmet. (Fig.
14)
Fig. 13 Fig. 14