N-Com B3, Инструкции пользователя и правила безопасности, Страница: 10 / 28

EN
10
3.2. Installing the system on the helmet
Fig. 15

Position the system inside the helmet as shown
in figure 15, next to the N-Com housing in the
shell.
Fig. 16
 Looking at the helmet from the outside, slide
the rear positioning tab into groove A as
shown in the figure;

Press in the area marked PUSH from inside the
helmet until the fastening clasp B clicks (Fig.
16).
Fig. 17

Pull out the connectors area from the helmet
gasket: the gasket will have to be slightly
deformed to facilitate the insertion.