B3
15
5.2.
N-Com Wizard
“N-Com Wizard” is the PC application that can be used to manage and configure the B3
system.
The programme can be downloaded from the Internet site www.n-com.it, in the “Download” section.
In order to use it, a helmet equipped with B3 must be connected to the PC, using the USB cable
supplied with the system.
N-Com Wizard allows you to customize your B3, specifically:
Setting the system audio levels
Pre-set and manage your favourite radio stations
Update the device firmware
Turn on or off the Bike-to-Bike menu
Manage connections with other bikes
5.3.
N-Com App
The N-Com system is pre-set for connection to the “N-Com App”, the Android application
used to configure and control the N-Com system directly from a Smartphone.
With the N-Com App, you can carry out most of the functions included in the N-Com Wizard program
or, alternatively, it can be used as a wireless Bluetooth keypad.
The N-Com APP can be downloaded free of charge from Google Play.
For additional details, please visit the website
www.n-com.it
6.
PAIRING UP BLUETOOTH DEVICES
In order for the B3 system to be connected to another Bluetooth device, the latter needs to be first
paired up with the N-Com system.
The pairing up procedure is the same for all Bluetooth devices: mobile phones, MP3 Bluetooth
players, satellite navigators, etc.
1.
Make sure the B3 is turned off;
2.
Press “
on
” and keep it pressed (for more than 4 seconds), until the LEDs start to flash
quickly and you hear a sharp beep in the headset, indicating the “Pair-up mode”;
3.
On the Bluetooth device, turn on the search for Bluetooth devices (refer to the instructions
manual of your device for the proper pairing up procedure, as it varies depending on the
brand and model of the device);
4.
After a few seconds, the mobile phone will display the name “N-Com B3 v.X.XX”, followed
by the manufacturer’s identification data;
5.
Select the N-Com device. If a password is requested, enter
0000
(four zeros);
6.
B3 will confirm the pairing up by means of a tone in the headset, and the LEDs will stop
flashing;
7.
Turn off and on both the mobile phone and the B3 to store the pairing up data.
Содержание B3
Страница 2: ......
