N-Com B3, Инструкции пользователя и правила безопасности, Страница: 7 / 28

B3
7
3. INSTALLATION
You can download the installation video from www.n-com.it N-Com / Download section.
Fig. 1 Fig. 2
Fig. 3
 Remove the “N-Com” protection plate located
on the helmet shell (Fig. 1) and open the
helmet chin guard (flip up helmets).

Remove the right and left cheek pads from the
helmet (see specific instructions provided in
the user manual of the helmet).

Remove the Noise Reducers from the two
cheek pads, and tear off the pre-cut plastic (if
equipped).
Fig. 4 Fig. 5
Fig. 6

Remove the back of the comfort padding by
pulling on the neck roll until it separates from
the shell (Fig. 4).
 Temporarily put the padding on the outside of
the helmet (Fig. 5).
 Remove the N-Com cover from the helmet
border gasket. Push from the inside of the
helmet to facilitate the removal (Fig. 6).