N.A.T. NAT-MCH, Техническое справочное руководство

Страница: 26 / 32

NAT-MCH BASE-Module– Technical Reference Manual
Version 2.10 © N.A.T. GmbH 26
7 Installation
7.1 Safety Note
To ensure proper functioning of the NAT-MCH BASE-Module during its usual lifetime
take the following precautions before handling the board.
CAUTION
Electrostatic discharge and incorrect board installation and uninstallation can damage
circuits or shorten their lifetime.
 Before installing or uninstalling the NAT-MCH BASE-Module read this installation
section
 Before installing or uninstalling the NAT-MCH BASE-Module , read the Installation
Guide and the User’s Manual of the MicroTCA system the board will be plugged into.
 Before installing or uninstalling the NAT-MCH BASE-Module on a backplane:
 Check all installed boards and modules for steps that you have to take before
turning on or off the power
 Take those steps
 Finally turn on or off the power if necessary
 Make sure the part to be installed / removed is hot swap capable, if you don’t
switch off the power.
 Before touching integrated circuits ensure to take all require precautions for handling
electrostatic devices.
 Ensure that the NAT-MCH BASE-Module is connected to the MicroTCA backplane
with the connector completely inserted.
 When operating the board in areas of strong electromagnetic radiation ensure that the
module
 is bolted the front panel or rack
 and shielded by closed housing