NAT-MCH BASE-Module– Technical Reference Manual
Version 2.10
© N.A.T. GmbH
17
4
Hardware
4.1
Front Panel and LEDs
The following figure shows the front panel of the
NAT-MCH BASE-Module
. It is
equipped with various LEDs.
NAT-MCH BASE-Module – Front Panel
Figure 3:
SMA1
SMA2
Status
Fault
Hot Swap LED
Hot Swap
Handle
NAT-MCH HUB-Module Uplink- Connector (optional)
4.1.1
MCH Basic-LEDs
The
Status-LED
indicates the operation status of the
NAT-MCH BASE-
Module
. If the LED is
green
, the
NAT-MCH BASE-Module
operates as
primary
MCH in the MicroTCA-system, if the LED shines
orange
, it is
operating as
secondary
MCH
The
Fault-LED
indicates a malfunction of the
NAT-MCH BASE-Module
The
Hot-Swap-LED
indicates the Hot-Swap-Status of the
NAT-MCH BASE-
Module
4.1.2
RJ45-LEDs
Two
RJ45-LEDs
are integrated in each RJ45-connector to indicate GbE-Status.
4.1.3
Status LEDs
Various
Status-LEDs
residing on the front panel (mounted on the LED-
Module) indicate the status of 12 AMCs, 2 CUs and 2 PMs
The
LNK-LEDS
indicate the Link-Status of an optionally mountable
NAT-MCH
HUB-Module