MyTurn GlobalPC, Руководство по началу работы, Страница: 79 / 102

P
ROGRAMS
4-29
2. For the example used in this guide, type the following:
My artist file
3. Click Save.
The Artist window displays with the document name in the Title bar.
To close Artist:
1. From the Title bar, click Done.
The Done window displays, as shown in the Writer section.
If you did not save the document, the Save it so I can use it again later button is
available. Click the button to save the document before closing the program. If you do
not save the document, any changes you made since the document was last saved are
deleted.
If you want to print the document before closing the program, click the Print my
document button.
If you decide that you do not want to close the program at this time and want to return
to the document to continue working on it, click the Go back to my document button.
2. Click Close the document and exit Artist button.
Using Artist
After creating a blank document the Artist window displays an electronic drawing board.
It includes a drawing area and toolbar that contains tools for drawing, moving, and
reshaping objects. The dotted margin lines around the edge of the drawing area define the
printable area of the page. When you create your drawing, objects that extend beyond the
dotted lines will not print.
To draw a rectangle:
You will now practice using Artist to draw objects.
1. From the toolbar, click on the Rectangle tool.
Notice that as you move the cursor onto the drawing area, the mouse cursor changes to
indicate you are in drawing mode.
Rectangle tool