MyTek USB2 CLASS2, Руководство пользователя

Страница: 14 / 16

14 Mytek USB2 Class2
6. Mount the top cover back.
7.Attach power cord and other cabling.
8.Turn on the converter.
For about 2 seconds no LED should be lit on
the converter’s front panel, as new software is
copied from memory to the main board chips.
Then, all LEDs should turn on momentarily for
about 10-20sec, and subsequently the unit
should begin normal operation.
Check Mytek webpage for information on the
latest firmware versions.
www.mytekdigital.com
15. Specifications
Technical Specification
DIGITAL
• Computer Audio I/O: USB 2.0, Audio Class
2, data stream up to 480Mb/s; 8 channels
in x 8 channels out, PCM up to 192kHz.
GENERAL
• Firmware: upgradable via Mytek Control
Panel, updates available online.