background image

5

Important Safety Information

ing: Read all instructions before using this machine. This 
product is intended for commercial use only.

To reduce the risk of fire, electrical shock, or injury:

1.  Read all instructions before using equipment.

2.  Use only as described in this manual. Use only manu-
facturer’s recommended attachments.

3.  Always unplug power cord from electrical outlet before 
attempting any adjustments or repairs.

4.  Do not unplug by pulling on cord. To unplug, grasp the 
plug, not the cord.

5.  Do not pull or carry by cord. Do not close a door on 
cord or pull cord around sharp edges or corners.

6.  Do not run appliance over cord. Keep cord away from 
heated surfaces. 

7.  Do not use with damaged cord or plug. If cord is dam-
aged, repair immediately.

8.  Do not use outdoors or on wet surfaces and/or stand-
ing water.

9.  Always unplug or disconnect from power supply when 
not in use.

10. Do not allow to be used as a toy. Close attention is 
necessary when used by or near children.

11. Do not use in areas where flammable or combustible 
material may be present.

12. Do not leave the unit exposed to harsh weather ele-
ments. Temperatures below freezing may damage com-
ponents and void warranty.

13. Use only the appropriate handles to move and lift unit. 
Do not use any other parts of this machine for this pur-
pose.

14. Do not pull on hoses in order to move the unit. Only 
use the appropriate handles.

15. Keep hair, loose clothing, fingers, and all parts of the 
body away from all openings and moving parts.

16. Use extra care when using on stairs.

17. To reduce the risk of fire or electric shock, do not use 
this machine with a solid-state speed control device. 
 

18. The voltage and frequency indicated on the name 
plate must correspond to the wall receptacle supply volt-
age.

19. When cleaning and servicing the machine, local or na-
tional regulations may apply to the safe disposal of liquids 
which may contain: chemicals, grease, oil, acid, alkalies, or 
other dangerous liquids.

20. Do not leave operating unattended.

Содержание 8070 Lite

















Отзывы: