04
LO-LINE RC & LO-LINE RC Heater Cooler
5.0 Preparation
Before proceeding with the installation, unpack the carton
contents and check against the checklist below:
1.
LO-LINE or LO-LINE Heater-Cooler unit.
2.
15mm isolating valves (1 pair).
3.
Instruction manual.
4.
Warranty card.
5.
Fixing kit (rubber mounts and cable gland).
6.
Remote control handset.
6.0 Fixing
G
Using the fixing dimensions (see fig. 1), mark the fixing hole
positions on the wall.
G
Drill and plug the wall for No. 8 x 40mm round head wood
screws ensuring that the wall plugs are suitable for the wall
type.
G
Remove the backing from the self-adhesive washers and place
on screws with adhesive side towards the point.
G
Tighten the screws into the wall leaving about 9mm
projecting.
G
Press adhesive washers to the wall.
Remove the outer casing as follows:
G
Remove the 2 screws from the underside of the unit (see fig. 2).
G
Lift off the outer case.
G
Fit chassis on to mounting screws and tighten.
Unit
A
B
C
Dimensions (mm)
6-4
523
404
359
9-6
645
526
481
14-10
854
733
681
19-15
1138
1018
974
62
58
150
Min.
each
side
15
0
M
in
.
107
38
5
70
26
3
A
C
B
Fig. 1
Cover Fixing Screws
Fig. 2
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - [email protected] 0844 556 1818
