09
LO-LINE RC & LO-LINE RC Heater Cooler
11.0 Operating Instructions
Description
This LO-LINE unit is fitted with a control system that provides
either automatic or manual control of the unit. In automatic
mode the desired temperature set point is selected and the unit
will adjust the fan speed according to the difference between
the actual room temperature and the set point. When the room
temperature reaches the set point the fan will switch off and
thereafter will continue to cycle on and off to maintain the room
temperature. The temperature set point range is 15 - 35°C.
In manual mode any of the three fan speeds can be selected by
overriding the automatic temperature control. This means that
air circulation can be provided in summer for example, or that
heating performance can be controlled manually.
The unit can be controlled using the infra red remote control
handset supplied with the unit (see fig.5) and also using the
control panel on the unit (see fig. 6). If necessary, however, the
control panel can be locked electronically to prevent tampering
once the controls have been set (see below).
The remote control hand set takes 2 AAA batteries (not supplied).
Fig. 5
Fig. 6
Controls
Display
Power button
Switches unit on & off
‘+/-’ button
Adjust temperature set point from
15 - 35°C
Scrolls into F1, F2 or F3 manual mode
Heating
Heating will only be provided when the central heating
boiler is on, the pump is running and the system water
temperature is greater than 43°C. Ensure the boiler is on,
and set timer, boiler controls and room thermostats as
necessary.
1
0
.0
1
1
.0
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - [email protected] 0844 556 1818
