FINESSE SC
18
EN
4.0 Operation
The on/off button is located at the bottom of
the control side of the radiator (A, picture 6).
The radiator should only be switched “on”
when it is correctly installed and secured to the
wall brackets. Ensure any external thermostatic
or line control is switched on.
5.0 Maintenance, Repair & Disposal
l
WARNING: Disconnect electrical supply
before carrying out any maintenance
activity.
l
The product should be cleaned using a soft
damp cloth. Do NOT use chemical or
abrasive cleaners as they will damage the
surface finish.
l
The radiator is equipped with overheat
protection that can not be reset (melt fuse).
This overheat protection disconnects the
current if the radiator becomes too hot (e.g.
when covered).
l
The radiator is filled with an exact amount of
environmental friendly vegetable oil. Any
repairs that require the radiator to be
opened shall therefore only be carried out
by the manufacturer or an approved agent.
l
In case of leakage, contact the manufacturer
or service agent.
l
When the radiator reaches the end of
its service life follow the regulations
concerning the disposal of oil.
Picture 6.
A
FINESSE SC. INSTRUCTIONS DE MONT
AGE
01.05.2016
