myMix IEX-16L Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 20

myMix IEX-16L Скачать руководство пользователя страница 14

14

SD

Unit Name
PROFILE 5

BACK

IEX16L-1-Input-1

IEX16L-1-Input-2

IEX16L-1-Input-3

IEX16L-1-Input-4

IEX16L-1-Input-5

6/28

SD

Unit Name
PROFILE 5

BACK

IEX16L-1-Input-15

IEX16L-1-Input-16

myMix 5-Input-1

myMix 5-Input-2

myMix 6-Input -1

14/28

To select the audio signals you want to use for your local mix,
go to SETTINGS and scroll to Remote Channel Selection.
Open the list by pressing the encoder button. Here you can
see all available signals on the network: from any IEX-16L as
well as from any myMix device that uses its local inputs.
Scroll to a channel and press the encoder button to toggle
between “Selected” (green check), or “Deselected” (red X).

Each  myMix  can  select  its  individual  selection  of  up  to  8
audio  channel  pairs  (up  to  16  audio  channels)  from  all
available channels on the network. On the status bar there is
a counter that shows the total amount of network channels
currently available (the figure behind the /) and the amount
currently  selected  on  the  myMix  (the  figure  before  the  /).
Each  myMix  can  select  a  maximum  of  16  audio  channels
within 8 audio channel pairs.

The channel selection is automatically stored in the current
profile. It is recommended to create a new profile for a
different scenario that has a different set of input signals as
this will minimize the set-up time. myMix can store up to 20
different profiles.

Selecting Audio Channels for myMix

Note: Because audio signals are streamed in pairs the channel counter will go up by two when you select a stereo channel, or a single
mono signal. However, if you select the adjacent input to an already selected mono signal (e.g. input 4 from IEX16L, after you have
selected input 3 already) the counter will not go up.

«
...
12
13
14
15
16
...
»

Содержание IEX-16L





















Отзывы:

Нет отзывов