MyFan FP6722AU, Руководство пользователя

Страница: 7 / 13

7
Assemble the
the Ceiling Fan Blades
Installing the Canopy Housing
Figure 1
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figure 2)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
NOTE: This step is applicable after the neccessary wiring
is completed.
Figure 2
INSTALLATION NOTE
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled may
result in damage to the fan blades.
▲ WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
Blade
Motor Assembly
Figure 1
Ceiling Canopy
Canopy Screw
Cover
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
1.
Secure the blades to the flywheel using the
3/16˝-24 screws with flat washers through the holes
located on the bottom of the flywheel of motor
assembly. (Figure 1)
x 12
x 12 FLAT WASHER
SCREWS
HARDWARE USED:
3/16˝-24
1. Loosen the two shoulder screws without fully
removing it in the hanger bracket. Assemble
canopy by rotating key slots in canopy over shoulder
screws in hanger bracket. Tighten all the shoulder
screws. (Figure 1)