MyFan FP6722AU, Руководство пользователя

Страница: 5 / 13

5
How to Hang This Ceiling Fan
WARNING
The fan must be hung with at least 2.1m of
clearance from fl oor to blades. (Figure 2)
WARNING
To avoid possible
fi
re or shock, be sure electricity is
turned off at the main fuse box before wiring.
(Figure 1)
Figure 2
CEILING
FLOOR
Figure 1
MAIN FUSE BOX
WARNING
The hanger bracket must be securely mounted and
capable of supporting at least 27 kg. If bracket and /or
timber batten are not securely attached, the fan could
wobble or fall.
1. Drill a hole in the ceiling board and batten for wiring.
Securely attach the hanger bracket to a timber batten
or other structural support using appropriate fasteners.
(Figure 3)
WARNING
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fi re hazard.
WARNING
To avoid possible shock, do not pinch wires between
the hanger ball assembly and the hanger bracket.
2. Carefully lift the fan and seat the downrod/hanger
ball assembly on the hanger bracket that was just
attached to the timber batten. Be sure the groove
in the ball is lined up with tab on the hanger bracket.
(Figure 4)
NO
LESS THAN
2.1 M
Downrod/Hanger
Ball Assembly
Hanger
Bracket
Note: Ceiling board and
wiring omitted for clarity.
Figure 4
Figure 3
Note: Ceiling board and
wiring omitted for clarity.
Screw with hex head
wood screws(2)
Not supplied
Hanger
Bracket
Tab
Timber Batten