MyFan FP6722AU, Руководство пользователя

Страница: 3 / 13

▲ WARNING
Do not install or use fan if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use with this product.
Substitution of parts or accessories not designated
for use with this product could result in personal injury
or property damage.
IF ANY PART IS DAMAGED OR MISSING,
CALL: 1300 469 326
This manual is designed to make it as easy as possible
to assemble, install, operate, and maintain this ceiling fan
Unpacking Instructions
For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all
steps have been completed and will be helpful in fi nding your place should you be interrupted.
Wiring and connectors must be of type required by
local regulations. The minimum wire would be a 3-
conductor (2-wire with ground).
Tools Needed for Assembly Materials
NOTE: If you are uncertain of part description, refer to
exploded view illustration. (Figure 1, page 10)
3
1. Check to see that you have received the following
parts:
• Fan Motor Assembly
• Hanger Bracket
• End Plate Assembly
Blade Set •
• One Phillips head screwdriver
(supplied)
• One stepladder
• One small blade
screwdriver
• One wire stripper
▲ WARNING
This fan must be installed by a licensed electrician.
Fan Motor Assembly
Hanger Bracket
End Plate Assembly
Blade Set
Hardware Bags
Wall Control Speed Capacitor
Wall Control •
Speed Capacitor •
• Hardware bags:
– 3/16 ˝ -24 screws with lock washer
& flat washers (blade to fan motor flywheel)
– Phillips Screwdriver, 10 cm
– Hex Washer Phillips Head Tapping
Screws Ø4.8
– #8-32 Pan Head Screws
– Flat Washers
– External Tooth Washer
– Spring Washer