Installing and Setting up the Card
10
Step 2 Connect
Plug the Card into an available CardBus slot on your notebook computer
2.1
During the install process, you will
be prompted to insert your Card.
Firmly insert the Card, label side
UP, into your computer’s CardBus
slot until it stops. Click “OK”.
The power light on the top of the
Card will light when the Card is
inserted properly.
Note:
If your system did not prompt
you to insert your Card after the
installation is completed, please do
so now.
Note:
If you are using the Windows
XP operating system, you will not be
prompted to reboot until after the
drivers are installed.