Myenergi ZAPPI-2H07TB Скачать руководство пользователя страница 16

Страница: 16 / 60

Operation

zappi

operation and installation manual

Boost Time Conflicts

If one or more boost times conflict, the boost will follow the latest time or longest duration.

Lock Function

zappi

can be locked from unauthorised operation. The Lock Function requires a PIN number to be entered before

the unit can be operated and/or a charge is allowed. The main display can also be hidden when

zappi

is locked.

The lock can be set to be active

–

Only when the EV is plugged in

–

Only when the EV is unplugged.

–

All the time.

The settings for the Lock Function can be found in the Other Settings/Lock Function menu option.

Lock Function Setting Description

EV Plugged

The Lock Function is active when the EV is plugged in, preventing tampering with the
charge session, or changing any settings

EV Unplugged

The Lock Function is active when the EV is disconnected, preventing unauthorised
charging

EV Plugged

and

EV Unplugged

are both set, then the PIN lock is always active.

zappi

is effectively locked against any unauthorised use and the PIN code will always be required to make any

changes locally or to start a charge.

These are the recommended settings if

zappi

is mounted in an exposed / publicly accessible location and you

do not want anyone else to be able to use it.

Timeout

The time before the Lock Function automatically reactivates after being unlocked

Lock Code

This is the current lock code and is five digits from (1 to 4), it can be changed here

Default code: 44444

Auto Hide

If set, this will hide the main display of the

zappi

to keep the power readings private

Charge:

Allow a charge session without the need to enter a pin-code. Useful to leave

zappi

access free but with the settings protected.

Test

Tests the socket lock solenoid when the charging cable is not plugged in.

zappi

will be used to provide public access for EV charging, then it is recommended to use the following

settings:



EV Plugged

– On



EV Unplugged

– On



Charge

– On



Lock Code

– changed to a private PIN number

Socket Lock

For untethered units only, the EV cable will be locked automatically when it is inserted into the

zappi

, even if it is

not plugged into the EV. A small ‘lock’ icon will be seen on the right side of the

zappi

, in the centre of the screen.

When the EV is disconnected, a press of the button, will unlock the cable for a duration of 5 seconds, allowing the
cable to be removed from

zappi

. After this time, the lock will be re-activated.

Содержание ZAPPI-2H07TB





























































Результаты поиска

Содержание ZAPPI-2H07TB

Отзывы:

Myenergi ZAPPI-2H07TB, Руководство по эксплуатации и установке, Страница: 16 / 60

Результаты поиска

Содержание ZAPPI-2H07TB

Отзывы: