Page
8
of
36
8.
Installation
8.1
Mounting
Step 1:
With the unit on its back on a flat surface, remove the front cover by unscrewing the two screws
(1)
on the front of the device
and lifting it off.
Step 2:
Loosen the two mounting bracket securing screws (2) and separate the bracket (3) from the
eddi
.
Step 3:
Place the bracket against the wall where you will be installing the device and mark the holes ready
for drilling. (If fixing to timber stud you can use the two central vertically aligned points to screw the bracket
directly into the timber.
8.2
Clearances
NOTE
eddi
is NOT suitable for installation outdoors
Ensure the device always has adequate ventilation; do not block the vents or obstruct airflow at
the back of the unit.
eddi
must be fixed to a flat vertical surface using the dedicated mounting bracket which comes
attached to the unit.
NOTE
Suitable fixings must be used dependant on application/mounting surface. To be determined by installer.
Содержание eddi 16A1P01H
Страница 5: ...Page 5 of 36 ...
Страница 10: ...Page 10 of 36 ...
