MyBinding CMT 130, Инструкция по эксплуатации

Страница: 48 / 61

11/09
CMT 130 Book Trimmer 4-1
Routine Tasks
Section Contents
TITLE PAGE
4.1 Under Book Air Blast.................................4-2
4.2 Waste Bin..................................................4-2
4.3 Cut Stick....................................................4-2
4.3.1 Changing the Cut Stick....................... 4-2
4.4 Knife ..........................................................4-3
4.4.1 Knife Change...................................... 4-3
4.4.2 Knife Depth Adjustment...................... 4-5
4.4.3 Knife Sharpening Rules...................... 4-6
4.5 Check Pressure Switch.............................4-6
4.6 Safety Systems Check ..............................4-7
4.6.1 Safety Check-Off Sheet...................... 4-8
Introduction
Certain tasks will be performed on a regular
basis but not necessarily on a set schedule.
The safety systems check, however, should be
done before each shift. The waste bin must be
emptied when full. The knives should be re-
placed when cut quality becomes unacceptable.
Performing as many of these tasks before a
shift begins prevents down time while a job is in
progress and ensures safe operation of the ma-
chine.
4 Routine Tasks