my!
WIND
Ltd.
Soola 1a
51013 Tartu, Estonia
Email: [email protected]
Website: www.mywind.ee
21 |
P a g e 2 6 / 0 7 / 2 0 1 9
them into the threaded holes. Fix the bolts cross wise with a torque of 14 Nm.
HINT:
At first place all the bolts and then perform the final fixing operation.
Figure 20
– Placing the blade cover
Step 6: Placing the nacelle cover
1. Take the my!Wind nacelle cover and place it on top and inside of the cooling ring in a way
that the tower passes through the hole for tower (see Figure 21). Align the eight fixing holes in
the cover and in the cooling ring.
2. Take eight M8 x 20 bolts and fit them with A 8,4 A2 washers and place the bolts to join the
cooling ring to the nacelle cover. Use WD-40 oil to lubricate the bolts before placing them into
the threaded holes. Fix the bolts cross wise with a torque of 14 Nm.
TIP:
At first place all the
bolts and then perform the fixing operation.
Figure 21
– Placing the nacelle cover
