1.
Enter the programming menus by pressing [9] + System Master Code.
2.
Press [1][0]nn[0] where nn is user 00 through 15.
3.
To turn Direct Bypassing:
o
on, press [2] + [#].
o
off, press [1] + [#].
4.
[*]+[4] +[#] to exit the programming menus.
To assign the System Testing to a user:
1.
Enter the programming menus by pressing [9] + System Master Code.
2.
Press [1][0]nn[0] where nn is user 00 through 15.
3.
To turn System Testing:
o
on, press [2] + [#].
o
off, press [1] + [#].
4.
[*]+[4]+[#] to exit the programming menus.
Paging Feature
Notification by Pager
Your system can notify up to three different pager phone numbers to report system events. The installer can program
any pager to receive pages for one or more of the following groups:
High Level Reports, which includes the following reports:
o
Sensor alarms
o
Bus failures
o
Sensor Tamper
o
No activity alarm
o
Sensor Restorals
o
Fire panic
o
Phone test
o
Police panic
o
Receiver failure
o
Auxiliary panic
o
Receiver jam
o
Duress alarm
o
Touchpad tamper
Low Level Reports, which includes the following reports:
o
Bypass sensors
o
AC power fail
o
Low battery
o
CPU low battery
o
Sensor Supervisory
o
Auto phone test
o
Trouble
o
CPU back in service
o
Phone test
o
Phone Failure
o
Touchpad supervisory
o
Event buffer full
o
Touchpad low battery
o
Force armed
o
Force armed (reports when a user bypasses sensors while arming system)
