If any alarm or system trouble is active, it continues to show up in every status check until the system is disarmed.
Full System Status
A Full Status combines the Short Status information with added details about specific system features. To get a Full
System Status, press ‚ + ‚. Interior sirens sound beeps according to the current arming level. Touchpads display the status
information, for example, “System is OK,” “SENSOR 03 BYPASSED,” “SYSTEM BATTERY IS OK,” “AC POWER IS OK.”
Note:
A Full System Status is not available from the fixed English touchpad.
System Alarm Sounds
The sirens and touchpads in your system emit alarm sounds whenever an alarm occurs, either by a sensor or panic
button activation. Each type of alarm sounds and reacts differently when activated, as described in the following table.
Type of Alarm
Alarm Sound
Fire
Repeating series of three beeps
Police
Continuous tone
Auxiliary
Rapid beeps
Setting the Time and Date
To set the system time:
1.
Enter the programming menus by pressing 9 + System Master Code.
2.
Press 00.
3.
Enter the correct time in 24-hour format (4 digits), then press ƒ. For example, if the current time is 7:23 a.m.,
press 0723 + ƒ.
4.
Press ‚ + 4 + ƒ to exit the programming menus.
To set the system date:
1.
Enter the programming menus by pressing 9 + System Master Code.
2.
Press 01.
3.
Enter the current date as 6 digits (mm/dd/yy) then press ƒ.
4.
Press ‚ + 4 + ƒ to exit the programming menus.
Adjusting System Sounds and Touchpad Brightness
Arming Your System Silently
Use the Silent Arming feature to arm your system without disturbing people throughout the house with arming status
beeps. There are two methods for implementing Silent Arming:
Silent on Demand (User presses [5] before arming.)
Arming Always Silent (Silent Arming feature on).
Regardless of the method employed, when Silent Arming is in effect, no Exit beeps sound.
Note:
Protest beeps will always sound when bypassing a sensor.
Silent Arming on Demand
