2.
Enter your access code. Touchpads display date and time or programmed text.
3.
The system sounds one long beep.
Arming Level 2 - STAY
There are times when you want intrusion protection, but still want the freedom to move around within your house
without setting off an alarm, for example, in the evening when your family is inside for the night. In this and similar
situations, arm your system to 2—STAY. To arm to Level 2 - STAY using a touchpad:
1.
Close all protected perimeter doors and windows.
2.
Press 2 at any touchpad. Touchpads display, “Enter Code.”
3.
Enter your access code. Touchpads display, ”Armed to STAY.”
4.
The system sounds two short beeps.
5.
If leaving the premises, exit through a designated delay door immediately.
Arming Level 3 - STAY
At other times, you want every sensor to be alert: When the family is away from home, or, in a business, after closing
time. In this and similar situations, set your system to 3—AWAY for maximum protection. All sensors are active—
perimeter door and window sensors, and interior motion detectors. To arm to Level 3—AWAY using a touchpad:
1.
Close all perimeter doors and windows.
2.
Press 3 at any touchpad. Touchpads display, “Enter Code.”
3.
Enter your access code. Touchpads display, ”Armed to AWAY.”
4.
The system sounds three short beeps.
5.
Exit through a designated delay door immediately.
Keychain Touchpad Arming
To disarm your system with a keychain touchpad, press the Unlock button. Your installer can set up your keychain
touchpad to arm the system in one of two ways:
1.
Press the Lock button to arm the system directly to Level 3 with no Exit delay. Using this method, you would not
be able to arm to Level 2.
2.
Press the Lock button to increase the arming level each time it is pressed (Level 1 to Level 2, or Level 2 to Level
3). The Exit delay time would be applied.
Quick Arm
Your system may be set up so that you’re able to arm the system without using an access code. To use Quick Arm,
increase the arming level by simply pressing [2] or [3] at any touchpad. Decreasing the arming level requires that the
user enter a code.
Quick Exit
Note: In UL Listed systems, this feature is disabled.
Your system may be set up so that when your system is armed to Level 2—STAY, you’re able to press D on any touchpad
and simply walk out of the door without having to disarm and rearm the system.
This is useful when your system is armed and you want to quickly pop outside to pick up the newspaper without
disarming your system.
