My ADT ITI Concord Express Скачать руководство пользователя страница 4

Bypassing a Sensor Indirectly 

Use this method if you are arming the system and would like to bypass doors and windows already open. 

To bypass sensors indirectly: 

1.

 

Leave open only those doors and windows that are to remain open. Close all others. 

2.

 

Arm your system to the desired level. The touchpad emits protest beeps and displays “PROTEST,” because of the 
open sensor(s). 

3.

 

At any touchpad. press BYPASS. Touchpads with displays show, “Bypassed Zones 01,” or “SENSOR 01 
BYPASSED,” for example. 

4.

 

The system sounds arming level beeps to indicate that the system is armed and open sensors have been 
successfully bypassed. 

To arm bypassed sensors, arm the system. To bypass sensors indirectly using a keychain touchpad, press the Lock button 
once to arm the system and again to bypass the open sensors. 

Was the Bypass Successful? 

To confirm whether or not a sensor was bypassed, press the Status [*] button on the touchpad. Touchpads with displays 
list bypassed sensors or zones. 

Panic Alarms 

Panic alarms are easily activated from any touchpad to quickly alert the central monitoring station to a Fire, Police, or 
Auxiliary emergency. A panic alarm can be activated at any time, regardless of the current arming level: 1 - OFF, 2 - STAY, 
or 3 - AWAY. 

This system is designed to inform a central monitoring station of the nature of the emergency so the correct personnel 
can be dispatched immediately. 

Fire Panic 

The Fire panic alarm sounds from all interior and exterior sirens. On monitored systems, the central monitoring station 
responds by calling the fire department. To activate a Fire panic alarm from a touchpad, press and hold both Fire 
buttons for 2 seconds. 

Police Panic Alarm 

The Police panic alarm sounds from all interior and exterior sirens, scaring off any intruder and alerting neighbors to the 
trouble. On monitored systems, the central monitoring station responds by calling the police. 

To activate a Police panic alarm using a touchpad, press and hold the Police button(s) for 2 seconds. To activate a Police 
panic alarm from a keychain touchpad, press and hold the Lock and Unlock buttons at the same time for 2 seconds. 

Auxillary Panic Alarm 

The Auxiliary panic alarm sounds from interior sirens only. It is typically set up by your security dealer, based on your 
specific needs. On monitored systems, the central station responds by calling the service or agency you specified 
through your dealer. 

Содержание ITI Concord Express

















Отзывы: