3.4
(1)
(1)
1)
2)
3)
(3)
(4)
Wichtig!
Montage Bildwand
Empfohlener Verstellbereich:
100 – 300mm vom Gehäuseende
5
12
3.5 Wiring instructions
Caution:
Electronic wiring must be carried out by trained persons only!
4.
4.1
4.2
Wiring diagram:
Projection
screen
motor
with integrated
remote control
up
stop
down
N
L
Servis
PE
L
Servis
N PE
M
I
R
C
white
brown
blue
green/yellow
Problem
The motor does not work
Possible reasons
The thermal protection has
switched off the motor
No connections to the
mains
Solutions
Wait about 30 minutes until
the thermal protection
releases the motor
Connect the power
supply to the mains
Operation
Directions for use
Error description
Power supply
230V/50Hz
3-wire-cable
Power supply
230V/50Hz
Caution:
the receiver of remote control is permanent under voltage, even in
stand-by mode. Therefore is recommended the product to be switched
off or reconnected when is not used for a longer time or during a storm.
This help to avoid a damage of the integrated system.
IF the non-delegable appliance is not providet with supply input and
plug or other unit for mains disconnection, which have disjunction in
all poles and whitch will quarantee the disconnection by overvoltage
III. category, must such that unit be build in the network.
Wiring plan:
RC
RC
2. open up
1. push
battery replacement
remote control
