M1.2.CUT45HF.NLFREN 09102018
14
NL
5�2 Periodieke controle
AANDACHT!
Een periodieke controle moet regelmatig door gekwalificeerd personeel uitgevoerd worden,
om de veiligheid te garanderen� De stroomvoeding moet voor elke controle uitgeschakeld
worden, om letsels te voorkomen, zoals elektrische schokken en brandwonden� Vanwege
de lozing van de condensatoren, moet de controle 5 minuten na het uitschakelent van de
machine plaatsvinden�
Tips:
Veiligheid
De controles en onderhoudswerkzaamheden moeten uitgevoerd worden nadat de machine
uitgeschakeld werd. Maak zeker dat de stekker uitgetrokken is alvorens de afdekkap te openen.
Als de machine onder spanning is, houd uw handen weg van de bewegende delen zoals de
ventilator, om materiele of lichamelijke schade te voorkomen.
Periodieke controle
Controleer regelmatig dat het interne aansluiting circuit in goede staat is (met name de stekkers).
Bevestig indien nodig. Als er oxidatie is, verwijder deze met schuurpapier, en sluit dan opnieuw
aan.
Controleer regelmatig de toestand van de kabels en de isolatie ervan. Vervang deze indien
beschadigd.
Statische elektriciteit
Om de halfgeleidende componenten en PCB’s tegen schade door statische elektriciteit te
beschermen, draag een antistatisch apparaat, of raak het metalen deel van de behuizing om de
statische elektriciteit te verwijderen, voor elk contact met de geleidende delen en PCB’s van de
interne bekabeling van de machine.
Houd de machine droog
Voorkom dat regen, water of stoom in de machine dringt. Als dit gebeurt, laat de machine
volledig drogen en controleer de isolatie van de machine (met inbegrip deze tussen de
verbindingen en tussen de verbinding en de behuizing) met een ohmmeter. De machine mag
alleen opnieuw gebruikt worden als alles normaal werkt.
Als de machine voor een lange periode niet gebruikt wordt, sla deze in de originele verpakking
op een droge plaats op.
Onderhoud
Een periodieke controle moet uitgevoerd worden, om een goede werking en een lange
levensduur van de machine te garanderen.
Wees voorzichtig als u deze controle uitvoert, met inbegrip van de inspectie en reiniging van de
binnenkant.
In het algemeen, moet deze controle om de 6 maanden plaatsvinden, en om de 3 maanden als
de werkomgeving stoffig is, of met zware vette roken.
Corrosie
Reinig de kunststof onderdelen met neutrale reinigingsmiddel.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
copyrighted
document
- all
rights
reserved
by
FBC
