9
EN
M1.1.WEL33.NLFREN - 25042019
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
2 Introduction
• Depending on the power cord type this fan heater may be used only in household, warehouses and workshops, building
sites or greenhouses depending. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating
elements. The thermostat feels the air temperature and controls the surrounding temperature. The fan motor is controlled by
thermostat and it stops working when the thermostat cuts off the heating element, and the self-resetting thermal cut-out will
switch off the heater to ensure the safety when overheating.
•
When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after
a short time. The heating element is made of stainless steel and was coated with protection oil by production. The smoke is
caused by the left oil when heated.
3 Technical specifications
Model
WEL33
Waterproof class
IPX4
Voltage
220 - 240 V
Required power
3000 W
Current
12.5 - 13.6 A
Required fuse
15 A
Setting
25 / 1500 / 3000 W
Self-resetting thermostat
65 °C
Product dimensions
270 x 255 x 400 mm
Net weight
4.6 kg
• Housing of steel plate and coated by heat-resistant powder.
• Supplied complete with cord and plug.
4 Description of control panel
• Left knob:
Selector with heat setting
• Right knob:
Thermostat dial
2
surrounding temperature
. The fan motor
is controlled by thermostat and it stops
working when the thermostat cuts off the heating element (for IFH01-33H-13)
.
And The self-resetting thermal cut-out will switch off the heater to ensure the
safety when overheating.
2.2
When using the heater for the first time, you may notice a slight emission of
smoke. This is quite normal and it stops after a short time. The heating element is
made of stainless steel and was coated with protection oil by production. The
smoke is caused by the left oil when heated .
3. Technical specifications
Model IFH01-33H-13
Waterproof Class
IPX4
Voltage 220-240V
required power
3000W
current
12.5-13.6A
Required Fuse
15A
Setting 25/1500/3000W
Self-resetting Thermostat
65°C
Product Meas ( mm
) 270*255*400
N.W.( KG)
4.6
3.1
Housing of steel plate and coated by heat-resistant powder .
3.2
Supplied complete with cord and plug .
4.
Description of Control Panel
4.1 Left Knob :
selector with heat setting
4.2 Right Knob :
Thermostat dial
5. Special safety regulations
5.1
Before use, please check the marking on the power cord. Depending on the
power cord type this appliance may be used in different ambient conditions
Type
You can use the appliance in
Do not use in
H07RN-F
household, warehouses and
workshops, building sites or
5 Using instructions
1.
Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet environments and
flammable objects.
2. Connect the fan heater to the mains.
3. Set the thermostat knob to the MAX and let the heater operate with full power.
4. The fan heater will switch on when the heating selector is set to one of the power settings.
5. Once the room reaches the required temperature, heating element will stop working, fan keep working. Once the
temperature decreased, the heating element will be working. The fan heater now starts and stops automatically and thus
keeps the room temperature constant.
6. Before switch off the heater, please turn the thermostat to MIN position and turn the switch to fan position, let the appliance
cool down for two minutes then turn off the heater and pull out the plug.
copyrighted
document
- all
rights
reserved
by
FBC
