MuxLab ProDigital 500790 страница 5 Скачать руководство пользователя

Страница: 5 / 49

HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual

1. Safety Notice

⚫

Electric Safety

Installation and operation must be in accordance with national and local electric safety standards.

Do not use any power supply other than the one originally supplied with this camera.

⚫

Caution when transporting

Avoid stress, vibration and sock during transport, storage and installation.

⚫

Polarity of power supply

The power supply of the product is +12V @ 2A (max). The polarity of the power supply plug is

shown below.

⚫

Care during installation

Do not grasp the camera head when carrying the camera. Do not turn camera head by hand. Doing

so may result in mechanical damage.

Do not apply any corrosive form of liquid, gas or solid to the camera to avoid damaging the plastic

cover.

To make sure there are no obstacles in the camera rotation range.

Never power on the camera before the installation is complete.

⚫

Do not dismantle the camera in any way

MuxLab is not responsible for damage caused by unauthorized modification or dismantling.

CAUTION!

Specific frequencies of electromagnetic fields may affect the image quality of the camera!

Содержание ProDigital 500790


















































Результаты поиска

Содержание ProDigital 500790

Отзывы:

Похожие инструкции для ProDigital 500790

Бренды по названию

Популярные бренды

MuxLab ProDigital 500790, Руководство по эксплуатации

Результаты поиска

Содержание ProDigital 500790

Отзывы:

Похожие инструкции для ProDigital 500790

Бренды по названию

Популярные бренды