MuxLab ProDigital 500790, Руководство по эксплуатации

Страница: 29 / 49

HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual
29
8)
ADTS Options
Optional settings: On or Off
9)
Apply/Cancel Button
Press the "Apply" button to save changes, or press
the "Cancel" button to cancel changes.
6.6.5 System Setup
1)
Reboot
Click the "Reboot" button for system restart.
2)
User and password
The user can modify the password (characters must
be letters and numbers only).
3)
Apply/Cancel Button
Modify password and click the "Apply" button to
save the new password or press the "Cancel" button
to cancel password change.
6.6.6 Network Setup
1)
Lan Settings
The Default IP address is 192.168.100.88. The
MAC address can be modified.
2)
Port Settings
A.
HTTP Port
The IP address identifies the network device, the
device can run multiple web applications, with each
network program using a network port to transmit
data, so data transmission can be carried out from
port to port. Port setting is used to set up the WEB
SERVER program port to transmit. When doing
port mapping, you need to be consistent with the
port number (default port: 80)
B.
RTSP Port
The camera supports the RTSP protocol for
network streaming, and can make use of the VLC
application or similar tools to broadcast.
C.
PTZ Port
Supports PTZ protocol, the default port is: 5678.
3)
Control Protocol Setting
Setting camera control communication protocol,
include Visca address, Pelco-D address, Pelco-P
address.
4)
RTMP Setting
Setting the camera network stream. The camera
supports two streams, in the two stream selection
control code with settings: "On", "Off", "Video",
"Audio", etc.
5)
RTSP Setting
Setting the camera network rtsp protocol: "On" or
"Off".
6)
ONVIF Setting