19
The 5-point safety harness (x, y)
· Place your child in the seat and make
sure that the legs of your child are
placed on each side of the leg piece.
· Make sure that the hip and shoulder belt
is positioned correctly over your child
and place both plastic clamps in the
central part of the harness attached to
the leg piece.
· To adjust the length of the shoulder
straps, loosen the shoulder protectors
from the belt by undoing the snap but-
tons. This will reveal the belt buckles.
Adjust the length by sliding the buckles
along both shoulder straps until your
child is comfortably secure. After ad-
justing, press down both snap buttons to
relock the shoulder protectors in place.
· The back support contains three posi-
tions for the shoulder belts. To adjust
the position you remove both shoulder
belts by moving the attachment rings
through the openings in the back of the
seat. Move the attachment rings through
the desired openings so that the shoul-
der belts are positioned properly.
· Regularly check the length and position
of the belts and adjust, where necessary.
· If the waist or crotch strap needs to be
reassembled move the attachment ring
through the corresponding opening.
safe2go car seat (up to 13 kg)
· Make sure that the frame has fully been
unfolded and the brake blocked during
all actions indicated below.
Place the safe2go adapters on the frame
· There are two foldable attachment
points on both sides of the frame. Make
sure that the attachment points are in a
vertical position.
· The adapter marked with ‘R’ is placed
on the right side of the frame, the adapt-
er marked ‘L’ is placed on the left side.
· Slide the adapters in the attachment
parts and press solidly until you hear
a click.
Place the safe2go car seat
· Orientate the Safe2go car seat such
that it is directed rearwards on the
frame.
· Hold the Safe2go car seat with the cen-
tral hinge points of the support bar di-
rectly above the adapters.
· Lower the Safe2go car seat and press
solidly into the adapters until you hear
a click.
· Check that the Safe2go car seat has
been placed horizontally and has been
attached properly by trying to lift it
from the frame.
remove the safe2go car seat
· Press the buttons on both adapters to
unlock the Safe2go car seat.
· Lift the Safe2go car seat straight up
from the frame.
remove the safe2go adapters (z1)
· Pull the unlock buttons on the inside of
the adapters upwards and vertically re-
move the adapters from the attachment
points.
Maxi-cosi car seat
· The Maxi-Cosi car seat adapters are suit-
able for use with the following Maxi-Cosi
group 0+ car seats: Maxi-Cosi Pebbles,
Maxi-Cosi Cabriofix, Maxi-Cosi City.
· Always observe the instructions in the
manual of your Maxi-Cosi car seat be-
fore you start using the car seat.
· Make sure that the frame has fully been
unfolded and the brake blocked during
all actions indicated below.
Place the Maxi-cosi adapters on the frame
· There are two foldable attachment
points on both sides of the frame. Make
English
Содержание Evo
