Muton VJ-1626UH Скачать руководство пользователя страница 9

ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ

VJ-1626UH  INSTALLATION MANUAL 

ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ

9

ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ

VJ1626UHE-I-00

 

Long Feed

Roll

Rigid

Media Type

Heater Link

Origin

Long Feed

Roll

Rigid

Media Type

Heater Link

Origin

5. Press the [Enter] key on Operation panel.

࡮ޓ

"Insert CleaningCart." is displayed on Operation 

panel.

6.Prepare the cleaning cartridges.

࡮ޓ

Number of the cleaning cartridges required: 6

7.Insert cleaning cartridges into all Ink cartridge slots.

࡮ޓ

Keep the arrow of Cleaning cartridge facing up 

and insert it into the printer.

࡮ޓ

Insert Cleaning cartridges all the way in Ink 

cartridge slot.

࡮ޓ

When all Cleaning cartridges are installed, 

"Busy-Washing" is displayed on Operation panel, 

and the printer starts charging the cleaning fluid.

࡮ޓ

When Cleaning fluid has been charged, "Remove 

Cartridges" is displayed on 

1RGTCVKQPRCPGN

8. Remove all Cleaning cartridges.

 "Busy-Washing" is displayed on Operation panel 

and the printer starts Head cleaning.

 After Head cleaning is complete, "Check waste 

fluid" is displayed on Operation panel.

 Check Waste fluid tank.

ޓ

ޓޓ

9. Press the [Enter] key on Operation panel.

ޓ

1

ޓޓ

No.   

Name 

ޓޓޓ

No. Name

ޓ

1

ޓ

Cleaning cartridge               

ޓ

 2

ޓޓ

Ink cartridge slots

ޓޓ

No.   

Name 

ޓޓޓ

No. Name

ޓ

1

ޓ

Cleaning cartridge

10. Prepare ink cartridges.

   The number of ink cartridges or Cleaning cartridges 

to be used differs depending on the number of 
colors selected in step 3.

1

When using 4-color set

     Cyan (C): 2

     Magenta (M): 2

     Yellow (Y): 1

     Black (K): 1

2

When using 6-color set

     Cyan (C): 1

     Magenta (M): 1

     Yellow (Y): 1

     Black (K): 1

     Varnish (VA): 1

     White (WH): 1

11. Shake ink cartridge horizontally 10 times.

12.Install ink cartridges into Ink cartridge slots.

(1)When using 4-color set

(2)

When using 6-color set

ޓ

࡮ޓ

You can check the ink color labels for ink colors 

and its cartridge slots.

࡮ޓ

Keep the arrow of ink cartridge facing up and 

insert it into the printer.

࡮ޓ

Insert ink cartridges all the way in Ink cartridge 

slot.

࡮ޓ

When a ink cartridges are installed, "Ink Refill 

**%" is displayed on Operation panel and ink 

replenishment starts. 

࡮ޓ

Initial replenishment takes about 9 minutes.

࡮ޓ

Ink filling operation and pause operation are 

repeated during the initial ink replenishment.

࡮ޓ

When 100% is displayed, the initial ink 

replenishment is complete.

࡮ޓ

After the initial ink replenishment is complete, 

"Media End" is displayed on Operation panel.

2

2

1

1

2

2

1

K

Y

M

M

C

4 colors

4 colors

C

2

2

1

Y

VA

WH

K

M

C

6 colors

6 colors

Shake the ink cartridge before use.

Shake the ink cartridges periodically.

Otherwise, the ink inside the cartridges 
settles or coagulates and may cause 
poor print quality or a malfunction.

CAUTION

Note that the ink colors and corresponding ink 
cartridge slots differ depending on the number of 
ink colors selected in step 3.

NOTE

ޓޓ

No.   

Name 

ޓޓޓ

No. Name

ޓ

1

ޓ

Ink cartridge       

   2

ޓޓ

Ink cartridge slots

ޓޓ

No.   

Name 

ޓޓޓ

No. Name

ޓ

1

ޓ

Ink cartridge       

   2

ޓޓ

Ink cartridge slots

Comply strictly with the following during 
ink filling.If filling is interrupted, ink will be 
lost when filling is resumed.

• Do not turn OFF the printer.

• Do not unplug the power cord set of the 
  printer.

• Do not open Front cover.

• Do not open Maintenance cover.

• Do not raise Media loading lever.

• Do not use ink packs that have little ink 
  remaining.

CAUTION

If the printer perform the nozzle check printing 
immediately after initial charging is complete, the 
following results may occur.

• Printed lines become blurred.

• The data is partially not printed.

In such cases, follow Operation manual "5.5 
Cleaning menu" and refill a small amount of ink. 
Then, check the printing result.

If there is no improvement in the print result even 
after refill a small amount of ink, leave the printer 
unused for an hour or more. Then, refill a small 
amount of ink again and check the print result.

If there is still no improvement, contact your local 
MUTOH dealer.

NOTE

ޓޓ

No.   

Name 

ޓޓޓ

No. Name

ޓ

1

ޓ

Ink cartridge

Содержание VJ-1626UH

















Отзывы: