background image

Unpacking  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Assembling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting the cables  . . . . . . . . . . . . . . . . . . . . . . . . 20

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Test printing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Sleep Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Accessing the Manuals . . . . . . . . . . . . . . . . . . . . . . . . 47

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

• Unauthorized copying or duplication of the whole or part of the contents of this Guide is prohibited.

• Every care has been taken in writing the contents of this Guide, but please contact MUTOH or the dealer you purchased the 

product from if you find any unclear, erroneous or otherwise unsatisfactory content in the Guide.

• Please be aware that MUTOH will not be liable in any way for failures or accidents that result from handling or operating the 

printer according to any procedures other than those set forth in this Guide.

• Company names and product names that appear in this Guide are registered trademarks of the respective companies.

Unpacking and Initial Setup

Startup Guide

VJ-1627MH

Содержание ValueJet VJ-1627MH

























































Отзывы: