Muton ValueJet VJ-1627MH, Руководство для стартапов

Страница: 50 / 56

50 Safety Instructions
Installing the printer
Do not install the printer on a surface:
On such surfaces the printer could topple over or fall off,
potentially causing injury.
• is not stable
• is not level
• receives vibration from other devices nearby.
Do not slant the printer, turn it upside down.
The ink inside the printer may leak.
Moreover, normal operation after shifting (to these
positions) cannot be guaranteed.
Keep this product level when moving it.
Four or more people are required to unpack and move
this printer.
When taking the printer out of the container box,
make sure to remove the vinyl, install Reinforcement
for transportation, and hold Reinforcement.
If lifting up the printer with the vinyl on, there is a
possibility the printer can slip and drop, and be damaged.
Concerning handling
Do not step on this printer or place heavy things on top of it.
It may cause an injury if the printer falls down.
Heed the following instructions for cleaning of the
cleaning wipers and the print head circumference.
• Wear gloves, so that ink will not get directly on your
hands.
• Cleaning sticks can be used for about 1 week.
After 1 week, or when you cannot remove ink clumps,
replace the cleaning stick.
Heed the following when cleaning the print head
circumference.
• NEVER touch the surfaces of the print head’s
nozzles.
It could result in damage to the print head.
• Do not touch the tip of a cleaning stick.
You could get oil or grease on it, which could result in
damage to the print head.
• Make sure to use a cleaning stick, and dip it in the
dedicated maintenance cleaner, and then clean
around the print head.
Wipe it with a fluid other than cleaning fluid can cause
the print head to clog.
Heed the following when cleaning the cleaning
wipers.
• Do not touch the cleaning wipers or the head cap
unit.
You could get oil or grease on them, with the result that
head cleaning cannot be implemented normally.
• Make sure to use a cleaning stick, and dip it in the
dedicated maintenance cleaner, and then clean
around the print head.
Wipe it with a fluid other than cleaning fluid can cause
the print head to clog.
WARNING
CAUTION
WARNING
CAUTION