User’s Guide ViperTX Extreme
Safety instructions
14
AP-75340 - Revision 1.0
1.5
Warning labels
A safety label is used on parts of the printer which especially need your attention. Understand
the locations and the descriptions of the danger associated with each label before operating
the printer.
Ò±¬»
Make sure that all labels can be recognized. If text or illustrations cannot be
seen clearly, either clean or replace the label.
When cleaning labels, use a cloth with water or neutral detergent. Do not use a
solvent or gasoline.
If a warning label is damaged, lost or cannot be recognized, replace the label.
When replacing warning labels, contact your local Mutoh dealer.
Label
Description
This label warns you to
be careful not to pinch
your fingers.
To obtain a constant an
good print quality, it is
highly recommended to
leave the front cover
closed during printing.
Be sure to disconnect
both the printer as winder
power cable before
servicing the machine.
The device is a Class A
digital apparel which
complies with Part 15 of
the FCC rules and
Canadian ICES-003
ÌØ×Í ËÒ×Ì ØßÍ ÌÉÑ
ÐÑÉÛÎ ÍËÐÐÔÇ
ÝÑÎÜÍô ÉØÛÒ
É×ÒÜ×ÒÙ
ËÒ×Ì ×Í ÐÎÑÊ×ÜÛÜò
ÌÑ ÎÛÜËÝÛ ÌØÛ Î×ÍÕ
ÑÚ ÛÔÛÝÌÎ×ÝßÔ
ÍØÑÝÕô Ü×ÍÝÑÒÒÛÝÌ
ßÔÔ ÐÑÉÛÎ ÍËÐÐÔÇ
ÝÑÎÜÍ ÞÛÚÑÎÛ
ÍÛÎÊ×Ý×ÒÙò
ÝßËÌ×ÑÒ
