MUTOH Viper TX Softsign, Руководство пользователя

Страница: 35 / 196

User’s Guide Viper TX Softsign
Product overview
AP-75360 - Revision 1.2 35
2
2.6.4 Network requirements
The printer requires a standard Ethernet cable to connect to the customer’s 100/1000 Base-T
or GigaBit network.
Both the printer and the host computer require an RJ-45 Ethernet cable to connect them to
the customer’s network. The printer’s network in terface is capable of GigaBit transfer speeds
but will also communicate with a 100/1000 Base-T network.
It is strongly recommended to:
connect the RIP directly to the network.
connect the printer directly to the network.
The preferred cable is:
Ethernet Gbit Category 5E (GBit) or higher.
It is strongly recommended to use a pre-manufactured patch cable, no self made cables, to
ensure proper connection.
2.6.5 Compressed air requirements
The printer itself does not requires compressed air. The winding system however is foreseen
from to pneumatic shafts. Apply compressed air to expand these shafts and to fix the fabric
cores securely.
A standard compressor with a maximum pressure of 8 bar will be enough.