MUTOH ValueJet VJ-628X Скачать руководство пользователя страница 83

Страница: 83 / 90

Handling messages/error messages 83

When the following message is prompted on the MSM, a smartchip error such as broken chip may have occurred in the ink

cartridge.

Check that the correct color is inserted in the cartridge slot and perform smartchip recovery.

This will allow you to continue to print.

To perform smartchip recovery, do one of the followings according to the message appeared.

Smartchip recovery

Display

Description

S/C card Recognition Error No. :********

An ink cartridge that needs smartchip recovery may have been installed.

Remove the ink cartridge and reload it.

If the printer is still unable to read it, install a new ink cartridge.

• If a message “Check that correct color is correctly installed. No. :****”

appears after the ink cartridge is reloaded, follow the message “Check that

correct color is correctly installed. No. :****” to operate.

Check that correct color is correctly installed. No. :****

An ink cartridge that needs smartchip recovery may have been installed.
Check that the ink color of the cartridge inserted is correct.

• In case of wrong color insertion, load a correct ink color cartridge.

• If color is correct, press the [Enter] key. The printer will perform smart chip

recovery and will continue to print.

Note

During smartchip recovery execution, the ink cartridge being recovered highlighted in yellow in the S/C Card Information of MSM.

Содержание ValueJet VJ-628X



























































































Результаты поиска

Содержание ValueJet VJ-628X

Отзывы:

Бренды по названию

Популярные бренды

MUTOH ValueJet VJ-628X, Руководство по эксплуатации

Результаты поиска

Содержание ValueJet VJ-628X

Отзывы:

Бренды по названию

Популярные бренды