MUTOH ValueJet VJ-628X Скачать руководство пользователя

Страница: 58 / 90

58 Head cleaning

Cleaning each part

To use this product always in its best condition, please clean periodically.

When nozzle clogging is found in nozzle check, conduct head cleaning. Head cleaning consumes ink.
There are several cleaning modes in this product. Please use them accordingly based on your usage condition.

Head cleaning

Short cleaning

Consumes less ink than Normal cleaning.

Normal cleaning

Conduct nozzle check before and after printing, and use when nozzle clogging is found.

Long cleaning

Consumes more ink than Normal cleaning. When nozzle clogging still occurs after Normal
cleaning, conduct Long cleaning.

Little Charge

Though much better cleaning results can be expected than Long cleaning, it consumes a
large amount of ink.

Important!

Comply strictly with the following when you performing “Little Charge”.

If charging is interrupted, ink will be lost when charging is resumed.

• Do not open the Front cover.

• Do not use ink cartridges that have little ink remaining.

Steps for head cleaning

[1]

Display the Printing Preferences screen of the printer driver.

"Displaying the Printing Preferences screen of printer driver" on page 10

[2]

Click [Cleaning] in the [Utility] tab under the [Utility] tab.

• The “Head Cleaning” window opens.

Note

The same can be also done with MSM.

Cleaning each part

Содержание ValueJet VJ-628X



























































































Результаты поиска

Содержание ValueJet VJ-628X

Отзывы:

Похожие инструкции для ValueJet VJ-628X

Бренды по названию

Популярные бренды

MUTOH ValueJet VJ-628X, Руководство по эксплуатации

Результаты поиска

Содержание ValueJet VJ-628X

Отзывы:

Похожие инструкции для ValueJet VJ-628X

Бренды по названию

Популярные бренды