MUTOH ValueJet VJ-628X, Руководство по эксплуатации

Страница: 30 / 90

30 Correcting paper feed
[3] Using a ruler, measure the length between “+” in the pattern.
• In the example below, the measured place is shown in blue dotted lines and arrows (the blue parts are not actually
printed).
[4] Confirm the measured length.
• If the measured length matches the length selected in Step 1, proceed to "Micro adjustment" on page 26 .
• If the measured length does not match the selected length, re-correct with "Checking picture quality" on page 24 .
3.
Micro adjustment
[1] Click [Start] in [3-1. Pattern Print] of [3. Micro Adjust].
• A pattern is printed.
[2] Observe the pattern and verify the micro change value.
• In the pattern, look for a place that has least white lines or overlapping in images.
• The number printed below the pattern is the micro change value.
Micro change value
Not adequate Adequate Not adequate