Operation Instructions ValueJet 1604W
Chapter 5 : Preparations before printing
66
AP-77300 – Rev 1.1 -17/09/2009,
Step 7 :
Perform the initial adjust print.
Press the [Enter] key.
o
The operation panel displays "Feed Length: 250 mm".
Notes
The length that the media is fed for initial adjustment printing is normally set at 250 mm.
If you make the feeding length longer, the accuracy of the Media feed compensation improves.
If you want to change the feeding length, press the [+] key or [–] key and change the set value.
Press the [Enter] key.
o
The operation panel displays "Printing".
o
Start Initial adjustment printing.
2
1
1
N° Name
1 Feed
length
2
Media feeding direction
o
When the initial adjustment printing is complete, the printer enters the normal status
After the initial adjustment printing, cut the media. See
“Cutting media”
Step 8 :
Measure the distance between two “+” signs in the initial adjustment print.
Step 9 :
Set up Initial Adjust Change.
Press the [+] key or [–] key to select "PF2: Initial Change".
Press the [Enter] key.
o
The operation panel displays "Init: 250.0/250mm".
Press the [+] key or [–] key and enter the measured value in step 3.
Press the [Enter] key
o
Saves the initial adjustment value.
o
Displays "PF2: Initial Change".
