Operation Instructions ValueJet 1604W
Chapter 3 : Installing the Unit
39
AP-77300 – Rev 1.1 -17/09/2009,
Press the [+] or [-] key to select “Set20: CR Maintenance”.
Press the [Enter] key on the operation panel.
o
The operation panel displays “CR Mainte.: Start”
o
The display enters the CR Maintenance menu.
Step 3 :
Press the [Enter] key on the operation panel.
o
Maintenance
starts.
o
The print head moves to the centre
o
The operation panel displays “CR Mainte.: END”
Step 4 :
Open the front cover
Notes
Perform the cutter replacement in a short time. Leaving the print head for a long time at the cutter
change position result in head clogging.
Step 5 :
Gently push the knob of the razor blade and simultaneously rotate the cutter holder in the direction
illustrated.
Notes
Do not strongly press or suddenly release the razor blade.
Spring is inserted in the cutter compartment, so razor blade may spring out.
Do not push the razor blade all the way down.
Razor blade may damage inside the product.
2
1
3
N° name
1 Razor
blade
2 Cutter
holder
3 Cutter
compartment
