MUTOH ValueJet VJ-1604W, Руководство по эксплуатации

Страница: 51 / 79

Operation Instructions ValueJet 1604W
Chapter 4 : Periodical maintenance
51 AP-77300 – Rev 1.1 -17/09/2009,
4.1.6 Cleaning the wiper
(1) Cleaning time
Clean the wiper once a week or when blurs or incompleteness in printing remains after the head cleaning.
Notes

Use the cleaning stick when cleaning the wiper.
Step 1 :
If the printer is ON, make sure that:

Printing or other operations are not in progress.

The display on the operation panel is in the normal state.
Step 2 :
Display the “CR Maintenance menu”.
Step 3 :
Press the [Menu] key.

The operation panel displays “Menu 1: Setup>”.

The operation panel shifts to the setup menu display.
Step 4 :
Press the [>] key.

The operation panel displays “Set1: MediaType”.
Step 5 :
Press the [+] key or [-] key to select “Set20: CR Maintenance”.
Step 6 :
Press the [ENTER] key.

The operation panel displays “CR Mainte.: Start”.

The display enters the CR Maintenance menu.
Step 7 :
Press the [ENTER] key.

Maintenance starts.

The print head moves to the left.

The wiper moves forward.

The operation panel displays “CR Maintenance: End”.
Step 8 :
Open the maintenance cover on the right of the printer.
1
N° Name
1 Maintenance cover