Mutec iclock, Руководство по эксплуатации

Страница: 31 / 42

\\\\\\\\\\\\\\\\\\
A N H A N G
A N H A N G
A N H A N G
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
88
Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 16
31
Loading and restoring the factory default preset
1) To load a preset:
Select the LOAD item from the OPERATION menu.
Quit the OPERATION function by pressing the ENTER key, then change to
the NAME function.
Select one of the PRESET01-08 memories by their preset number or
name using the up/down keys and confirm by pressing the ENTER key.
Press the ENTER key twice to switch to the PRESET function. Press any
up/down key and the ENTER key in succession. SHURE? will be displayed.
Press the ENTER key again to enable the selected preset. If no user input
occurs, the operation will be canceled after a short time.
2) To restore the factory default preset:
Select the SET DEF item from the OPERATION menu.
Quit the OPERATION function by pressing the ENTER key, then change to
the NAME function.
Select one of the PRESET01-08 memories by their preset number or
name using the up/down keys and confirm by pressing the ENTER key.
Press the ENTER key twice to switch to the PRESET function. Press any
up/down key and the ENTER key in succession. SHURE? will be displayed.
Press the ENTER key again to set all settings stored as part of the selec-
ted preset to their defaults. If no user input occurs, the operation will be
canceled after a short time.
(Note that changes to the preset name will be retained!)
External Control Using GPIO - to select presets using GPIO:
If the iC-ALARM/GPI option (p/n 8005-066) is installed, a GPICNTRL is avai-
lable in the OPERATION menu. If this parameter is enabled, the first three
GPI inputs of the interface can be used for selecting the presets. GPI3, 2, 1
= 000 = PRESET01, = 001 = PRESET02, etc.
If preset control using GPIO is enabled, the most recent preset is loaded
when booting the iCLOCK or iCLOCKdp. This will overwrite any changes to
the preset that might have existed from previous use.