background image

\\\\\\\\\\\\\\\\\\

A N H A N G

A N H A N G

A N H A N G

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

88

Manual SDs-01 D  3.2.2003 17:45 Uhr  Seite 16

18  

CYCLESYNC is not available when 
the LONEREF function is set to HOLD 
(see GLOBAL 2/4 menu page).

!

As the synthesizer is capable of continuously 
supplying the adjusted iCLOCK output 
signals, even a manual clock source change 
on an input (by replugging the clock lines) is 
supported during operation!

It is not important whether the change occurs, 
for example, from a PAL SD video signal to a 
Word Clock or GPS signal. The set output clock 
rates will not be altered; only the base rate 
will gradually be updated to match the new 
source using iCLOCK‘s SoftReLock functionality 
(see chapter iCLOCK TECHNOLOGY).

Locking the internal Video 

Reference Generator – 1

If PAL or NTSC SD video is selected 

as external reference, the internal video 
reference generator will be automa-tically 
gen-locked by the reference source and 
switches to the same video format! This gua-
ranties correct phase relationships between 
the video source and iCLOCK‘s generated sync 
signals. A video format conversion is only 
possible using the optional video generator 
P/NVSG-02 (Order no. 8010-010) additionally.

With synchronization to PAL or NTSC SD bi-
level video it is not possible to change the 
clock reference (REF) of the internal video 
reference generator!

!

If the optional second video generator is 
installed, it is necessary to split up the video 
output pairs between the two generators. 
Therefore, two jumpers have to be removed 
from their socktes on the mainboard, see the 
»Splitting-up the Video Ouputs for dual 
Video Generator Operation« section in the 
APPENDIX.

V I D E O

R E F

F O R M A T

V I D E O T Y P E

O U T 1 + 2

I N T E R N P A L

B L A C K + B U R S T

|

<

|

<

| <

VIDEO page

VIDEO  OUT 1 + 2 

(page name) 

VIDEO OUT 1 + 2 indicates that the internal video reference generator sends 
its signals to both PAL/NTSC VIDEO OUT 1 and 2. This means also that only 
one video reference generator is installed.

If the optional second generator is installed, another menu page will auto-
matically be added for it. The page names will change accordingly:

VIDEO  OUT 1 

=  internal video reference generator  

VIDEO  OUT 2 

=  optional video generator 

REF 

(function) 

REFERENCE This function allows for setting the clock source of the respec-
tive video generator and can also enable video signal routing. The factory 
default is INTERN.

INTERN 

(setting) 

INTERNAL links the video generator to the internal reference clock oscilla-
tor. An extraordinary feature of iCLOCK is that the synthesizer can be syn-
chronized to an external clock source independently of the simultaneously 
enabled video generator. Therefore, only the audio-related clock signals 
might be subject to any present clock source deviation while the video sig-
nals are output with the accuracy of the internal clock: In a way, the video 
generator acts as »independent autonomous generator« within iCLOCK.

EXTERN 

(setting) 

EXTERNAL This setting synchronizes the video reference generator to the cur-
rently selected external clock source. Any signal or phase relations between 
the input clock signals and the selected video format will be recognized auto-
matically and be routed internally in compliance with AES11 and EBU R83.

SYNC 

(function) 

SYNCHRONIZATION This function allows for manual or automatic synchro-
nization of the synthesizer to selected clock sources assigned to the REF1–3 
slots. 

SEQSYNC 

(setting)

 

SEQUENCE SYNCHRONIZATION This is the default setting when activating 
the REF1–3 menu page. It indicates the standard reference synchronization 
mode of iCLOCK. 

REF 1, REF2, REF3 

(setting)

 

If one of the REF1, REF2, or REF3 parameters is selected and confirmed by 
pressing the ENTER button, the synthesizer will immediately synchronize  
the clock source assigned to the corresponding REF slot. The output signals 
are set or adapted to the new source within the period specified by the 
LOCKTIME parameter (see GLOBAL 2/4 page).

CYCLESYNC 

(setting)

 

CYCLE SYNCHRONIZATION With this setting, the input circuit querys the three 
inputs for clock source reestablishment by cycling from REF1 to REF2  to REF3 
and to the internal video reference generator automatically until a source is 
available. The system‘s priority is programmed to the first reference slot (REF1).

Refer to »Sequence Synchronization and Cycle Synchronization« section in the 
iCLOCK TECHNOLOGY chapter for details about SEQSYNC and CYCLESYNC.

Configuring the internal Video Reference Generator

The settings of the internal video reference generator and the four video 
outputs available with iCLOCK standard version are configured on this 
page. Two output pairs comprising one top-row and one bottom-row BNC 
output each are available on the rear panel. These are numbered as PAL/
NTSC VIDEO OUT 1 and 2. 

Содержание iclock











































Отзывы: