6
Diagram 2: 6KL/10KL Rear Panel Diagram 3: 6K(L)/10K(L) Input/Output Terminal
1.
External battery connector
2.
RS-232 communication port
3.
Intelligent slot
4.
USB communication
5.
Emergency power off function connector (EPO connector)
6.
Cooling fan
7.
Input circuit breaker
8.
Input/Output terminal (Refer to Diagram 3 and 5 for the details)
9.
Maintenance bypass switch
10.
Output terminal
11.
Grounding terminal
12.
Utility input terminal
2-3. Single UPS Installation
Installation and wiring must be performed in accordance with the local electric laws/regulations and execute
the following instructions by professional personnel.
1)
Make sure the mains wire and breakers in the building are in compliance with the standard of rated
capacity of UPS to avoid the hazards of electric shock or fire.
NOTE: Do not use the wall receptacle as the input power source for the UPS, as its rated current is less than
the UPS’s maximum input current. Otherwise the receptacle may be burned and destroyed.
2)
Switch off the mains switch in the building before installation.
3)
Turn off all the connected devices before connecting to the UPS.
4)
Prepare wires based on the following table:
