9
5. Insert fingers between neck seal and neck. Gently stretch the seal
outward and upward while pulling neck seal over your head.
6. With an unclenched fist, slowly pull each hand through wrist seals
while holding the rubber seal open.
CAUTION: Pulling on the rubber wrist seal may damage
the seal.
NOTE: If wearing suspenders, remove suspenders prior
to proceeding
8. Pull suit down past hips and slide legs from the suit.
9. Follow the cleaning and storage instructions for the suit.
CLEANING AND MAINTENANCE
CLEANING
1. Thoroughly rinse your dry suit after every use.
CAUTION: Do not dry clean. Do not iron. Do not bleach.
2. Treat stains with a pre-wash treatment such as Shout® or Spray
‘n Wash®. Follow the manufacturer’s instructions. Rinse well.
3. Machine wash warm (104° F/40° C) on gentle cycle using a gentle
powder or liquid detergent. Do not use fabric softener, bleach or
wash-in treatments, as they can affect the suit’s breathability.
4. Tumble-dry using an air setting
MAINTENANCE
Regular zipper maintenance is recommended to maintain a water-tight
seal, inhibit corrosion and keep the zipper gliding freely. These steps
are essential to zipper longevity:
1. Clean the zipper of any heavy deposits of mud, sand, salt or
foreign substances using warm soapy water.
2. TIZIP
®
MasterSeal zippers need to be lubricated on the docking
end from time to time. Please use the original TIZIP
®
lubricant or
other available zipper lubricant as listed below.
3. Carefully apply over the docking end surfaces on front and back
and inside where they connect to the zipper chain.
